These 7.25" rigid cerametallic drive plates have been designed with rallying in mind, with a ceramic and metallic compound friction material. The friction material is available in 2 options, bonded or riveted to the plate. The bonded plates have a greater friction surface area, where the riveted plates may be better for heavy duty applications as the mechanical fastening can tolerate higher torque loads. The cerametallic material gives a smoother engagement over the sintered material.
- Smoother engagement than sintered material
- Increased resistance to clutch slip making it more suited to Rally or Off road vehicles
- Bonded or riveted friction material options
- Suits AP Racing 7.25" (185mm) clutch covers
Designed to suit AP Racings' range of 7.25" clutch cover assemblies, there are a range of different splines sizes and drive plate types to suit most applications.
All plate options are 7.11mm thick.
Specifications
| Drive Plate Type | 3 Paddle Riveted, 4 Paddle Riveted, 6 Paddle Riveted, 3 Paddle Bonded, 3 Paddle Bonded - Outer Plate, 3 Paddle Bonded - Centre Plate, 4 Paddle Bonded, 6 Paddle Bonded - Outer Plate, 6 Paddle Bonded - Centre Plate |
| Spline | 1 inch x 23, 28.5mm x 10, 20.3mm x 24, 1 inch x 10, 29mm x 10, 29.4mm x 26, 24mm x 21, 1 inch x 24, 20mm x 17, 23.3mm x 21, 29mm x 21, 1 inch x 22, 22.2mm x 10, 22mm x 26, 1 1/8 inch x 10, 7/8 inch x 10, 1 5/32 inch x 26, 7/8 inch x 20, 21.1mm x 18, 18.3mm x 21 |
| Brand | AP Racing |